The Upgrade Kit LCD and controller were originally designed for some Rad bikes. However, many people have asked if they will work on The Wagon. The short answer is yes! Although we have not tested it, the plugs and connections are all the same and it DOES in fact work.
Note that some settings may need to be changed for proper operation. P1 is determined by the number of magnets or poles in the motor as well as the gear reduction. As The Wagon is a direct drive motor, use the number 46 for P1. P2 may also require a change for a correct speed reading.
Some customers have reported a "noise" when apply full power of C5 = 10. Once again, we have not tested this setup so use caution, or turn the power down slightly with the C5 setting to avoid overstressing the stock motor. To date we have not been made aware of any failures. Just in case, we are working on a replacement 1,500 watt motor for those who wish to be more adventurous on speed...
Keywords: Wagon